Since this is a slightly complex project, I thought I would go through how I went about it. This involved substantial 3D printing and wiring. After being cooped up at home for so long, I wanted a project, so I decided to build the OpenBulletFeeder by AmmoMike83 as found on Thingiverse. But one thing I was missing was a bullet feeder.ĭAA makes a perfectly good bulletfeeder, but it also costs almost $500. I have a pretty good setup for reloading 9mm – a Dillon 650XL with case feeder and a DAA primer filler.
PWM DC Motor Speed Controller, DC10-55V/40A MaxĭC 12V 100RPM Gear Motor High Torque 37mmġ2V Power supply with optional pigtail adapterĪssorted M3 SHCS / Assorted M3 Heat Inserts / Assorted M3 Nuts and WashersĪ pair of ~14 AWG wires for connecting PWM controller to motor.As you’ve noticed from some of my AARs, I am increasingly relying on reloads to see myself through classes and matches, especially with 9mm. – Mounting hole diameter decreased to 3.2mmģMF Files are available for download on my GitHub page below. – Flip ramp mounting hole diameter increased to 4.7mm – Mounting hole diameter increased to 4.7mm With this version you can “fill the tube” going to the bullet die completely, then load a bunch before having to This option includes just two piece and requires 5 additional heat inserts as well as a 3x50mm SHCS. – For those that are not interested in adding the motor, controls and sensor, there is now a Hand Turn Option. I’m in the process of working backwards to recreate the documentation, but there may be gaps present. This is a past project that was started before the creation of this website. I believe AmmoMike is the creator of the original CAD files, so many thanks to him as well.
Special thanks to:ĭPGunWorks' 9mm Bullet Feeder Die was used without modification - See Here. I came across them at some point on a reloading forum and unfortunately am unaware of who the original credit goes to. There is an integrated speed control, cut-off switch and bullet seating die.Īside from some small modifications, the mounts and cut-off switch, these are not my original designs or files. 9mm bullets are placed into the hopper and as the feeding wheel spins, bullets fall into the exterior slots and are automatically flipped to sit right side up if they are not already. This is used for progressive reloading presses. A working 3D printed version of the Bullet feeder.
0 kommentar(er)
